What's the Difference Between Sleep and Hibernate in Windows?
Quick Links
Key Takeaways
Sleep saves your current work to RAM, and your computer continues to draw a little bit of power while in sleep mode. Hibernate saves your current work to your hard drive or SSD, and consumes no power.
Windows provides several options for conserving power when you are not using your PC. These options include Sleep, Hibernate, and Hybrid Sleep, and are particularly useful if you have a laptop. Here's the difference between them on Windows 10 and Windows 11.
Sleep vs. Hibernate
Sleep mode and hibernate accomplish similar things, but there are a few important differences.
Sleep mode is a power-saving state that is similar to pausing a DVD movie. All actions on the computer are stopped, any open documents and applications are put in memory while the computer goes into a low-power state. The computer technically stays on, but only uses a bit of power. You can quickly resume normal, full-power operation within a few seconds. Sleep mode is basically the same thing as "Standby" mode.
Sleep mode is useful if you want to stop working for a short period of time. The computer doesn't use much power in Sleep mode, but it does use some.
Hibernate mode is very similar to sleep, but instead of saving your open documents and running applications to your RAM, it saves them to your drive. This allows your computer to turn off entirely, which means once your computer is in hibernate mode, it uses zero power. Once the computer is powered back on, it will resume everything where you left off. It just takes a bit longer to resume than sleep mode does. Sleep mode used to be much faster than hibernation, since hibernation was limited by the speed of a mechanical hard disk. Modern SSDs --- especially PCIe NVMe SSDs --- are blazing fast, and it really shows when you're using hibernate.
Use hibernate mode if you won't be using your laptop for an extended period of time, and you don't want to close your documents.
What Is Hybrid Sleep?
Hybrid Sleep mode is a combination of the Sleep and Hibernate modes meant for desktop computers. It puts any open documents and applications in memory and on your hard disk, and then puts your computer into a low-power state, allowing you to quickly wake the computer and resume your work. The Hybrid Sleep mode is enabled by default in Windows on desktop computers and disabled on laptops. When enabled, it automatically puts your computer into Hybrid Sleep mode when you put it into Sleep mode.
Hybrid Sleep mode is useful for desktop computers in case of a power outage. When power resumes, Windows can restore your work from the hard disk if the memory is not accessible.
How to Put Your Computer In Sleep or Hibernation Mode
To access the Hibernate and Sleep options on Windows 10 or Windows 11, open your Start menu and click the Power button. The Hibernate and Sleep options will appear in the Power menu next to other options like Shut Down and Restart.
If you don't see the Sleep option or the Hibernate option, it may be for one of the following reasons:
- Your video card may not support Sleep mode. Refer to the documentation for your video card. You can also update the driver.
- If you don't have administrative access on the computer, you may have to refer to the administrator to change the option.
- The power-saving modes in Windows are turned on and off in your computer's BIOS (basic input/output system). To turn on these modes, restart your computer and then enter the BIOS setup program. The key for accessing BIOS differs for each computer manufacturer. Instructions for accessing BIOS generally displays on the screen as the computer boots. For more information, see your computer's documentation or check the website for your computer's manufacturer.
- If you don't see the Hibernate option in Windows 10 or Windows 11 it's because it's hidden by default. Luckily, you can re-enable hibernation with a few clicks.
How to Wake Your Computer from Sleep or Hibernation
Most computers can be woken up by pressing the power button. However, every computer is different. You might need to press a key on the keyboard, click a mouse button, or lift the laptop's lid. Refer to your computer's documentation or the manufacturer's website for information about waking it from a power-saving state.
How to Enable and Disable the Hybrid Sleep Option
To enable or disable the Hybrid Sleep Option, you must use the Control Panel. Click the Start Button, then enter "Control Panel" in the search box.
If you use Windows Subsystem for Linux (WSL) , you will not be able to enable hybrid sleep at all. The virtual machine hypervisor disables it completely. To reenable it, open the Start Menu, search " Turn Windows Features On and Off ," then make sure you untick both "Windows Virtual Platform" and "Windows Hypervisor Platform." Restart your PC, and it should be possible to enable hybrid sleep mode. This will completely disable WSL.
There are different ways of viewing and accessing the tools in the Control Panel. By default, the Control Panel settings are grouped by Category. From the Category view, click "System and Security."
Then, click "Power Options" on the System and Security screen.
On the Choose or customize a power plan screen, click the "Change plan settings" link to the right of the currently selected power plan (either Balanced or Power saver.)
You can change the Hybrid Sleep option for either one or both of the power plans. The steps are the same for both.
On the Change settings for the plan screen, click the "Change advanced power settings" link.
On the Power Options dialog box, click the "Change settings that are currently unavailable" link.
Click the plus sign next to Sleep to expand the options if they are not already expanded. Click the plus sign next to Allow Hybrid Sleep. Select "Off" from one or both of the drop-down lists under the Allow Hybrid Sleep heading.
You can also double-click on a heading to expand it.
By default, Windows requires a password to access the computer when you wake it up from a power-saving state. You can use the Power Options dialog box to turn this off. The first heading in the list box is the name of the power plan chosen in the drop-down list above the list box. Click the plus sign (or double-click on the heading) to expand the heading and select "Off" from one or both of the drop-down lists under the heading.
At this point, you can click "OK" to save your changes. However, if you want to prevent your computer from automatically sleeping or hibernating, leave the Power Options dialog box open, as we will use it again in the next section.
How to Prevent Your Computer from Automatically Sleeping or Hibernating
You can also change the amount of time before your computer goes into sleep or hibernate mode, or turn off each mode completely. Here's how to do this.
If you are using a battery-powered laptop, be careful when changing the time before your computer goes into sleep or hibernate mode, or when turning off the sleep or hibernate mode completely. If the battery dies when you're in the middle of working on the computer, you can lose data.
If the Power Options dialog box is not currently open, open it as discussed above.
Double-click on the "Sleep" heading, and then double-click on "Sleep After." If you're using a laptop, click "On Battery" or "Plugged In" to activate the edit box. Click the down arrow until "Never" is selected. You can also type a 0 into the edit box, which is the equivalent of "Never."
If you're using a desktop computer, click Setting, and click the down arrow until "Never" is selected.
You can do the same for the "Hibernate After" heading.
If you want the display to stay on, double-click on the "Display" heading and then double-click "Turn Off Display After" and change the "On Battery" and "Plugged In" values to "Never". Or, you can specify a different amount of time after which the display will turn off.
Click "OK" to save your changes, and then click the "X" button in the upper-right corner of the Control Panel window to close it.
Now you can be smart in your choice of power-saving modes. If you're using a laptop computer, the best option is most likely Hibernate, because it saves the most power compared to Sleep and Hybrid Sleep.
ncG1vNJzZmivp6x7qbvWraagnZWge6S7zGhoaWpoboRww8eaq6xlpJ2ybrDIn52eqpWjsKZ5wZ6rsJ2Vo3q0uMSep2aZnpl6qbXBnqmnmaSaeqq6jLCgp5yfrMBw